J-0198

acceptedAccept

Line: LN-12
Station: 118+80
Weld date: 2026-05-06
Spec: 24" × 0.375"

31.92078, -102.46088

No open cross-check alerts on this joint.

Welder passes

RootDitch side
Marcus Cole RC-118
May 6, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
RootWorking side
Dwayne Ferris RC-204
May 6, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassDitch side
Junior Escamilla RC-158
May 6, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassWorking side
Luis Ontiveros RC-231
May 6, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
FillWorking side
Cody Latham RC-165
May 6, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
FillDitch side
Kelly Boudreaux RC-350
May 6, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
CapWorking side
Marvin Doucet RC-173
May 6, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
CapDitch side
Sam Whitfield RC-388
May 6, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

NDT results

RTAccept
May 6, 2026, 8:00 PM · D. Halloran (ASNT II)
No recordable indications.
RT film map — clock position1 indication
12123456789101112
- LCLow cap4:02–4:13 · 1.13" · d 0.05"Call varies by inspectorCap reinforcement below flush — called for grind-out and cap re-run.

Visual inspection (CWI)

Fit-upAcceptJoanne ReyesMay 6, 2026, 6:00 AM
API 1104 · Bevel, alignment and hi-lo verified prior to root.
Final visualAcceptJoanne ReyesMay 6, 2026, 12:44 PM
API 1104

Coating inspection

RejectRenee Alcorta5/6/2026
DFT
19.1 mils
Holidays
0
Surface temp
91°F
Humidity
71%
SSPC-SP 10 near-white blast · FBE + ARO overlay

Log a pass on this joint Record NDT result