J-4040

Welder passes

1. RootDitch side
   Weston Trahan RC-133

   Jun 14, 2026, 8:35 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

2. RootWorking side
   Brent Kessler RC-540

   Jun 14, 2026, 8:35 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

3. Hot PassWorking side
   Junior Escamilla RC-158

   Jun 14, 2026, 9:10 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

4. Hot PassDitch side
   Ty Maldonado RC-552

   Jun 14, 2026, 9:10 AM · logged by C. Ramirez (Survey)

   WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

   4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

5. FillDitch side
   Ronnie Pace RC-547

   Jun 14, 2026, 9:45 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

6. FillWorking side
   Marvin Doucet RC-173

   Jun 14, 2026, 9:45 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

7. CapDitch side
   Shane Bergeron RC-181

   Jun 14, 2026, 10:20 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

8. CapWorking side
   Sam Whitfield RC-388

   Jun 14, 2026, 10:20 AM · logged by C. Ramirez (Survey)

   WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

   4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

9. RepairWorking side
   Ronnie Pace RC-547

   Jun 14, 2026, 10:30 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

• RTRepair

  Jun 14, 2026, 8:00 PM · D. Halloran (ASNT II)

  Material lamination in pipe body (mill defect, not charged)

  Not charged to a welder.

  Repairable indication — grind and re-weld authorized.

  RT film map — clock position3 indications

  12123456789101112

  • UCUndercut12:49–12:52 · 0.34" · d 0.04"Within acceptance limits.
  • UCUndercut1:18–1:28 · 1.05" · d 0.04"UC exceeds API 1104 acceptance limits — charged for re-work.
  • EUExcess reinforcement3:19–3:23 · 0.42" · d 0.02"Within acceptance limits.
  Call disputedOpen7/26/2026

  Kyle Bassett (Contractor QC) — Crew disputes the low cap call — cap reinforcement measured within API 1104 limits on the ditch side. Requesting Level III film review.

  Escalated to NDT Level III · Curtis Vandergriff (NDT Level III (RT/UT))