J-1480

repairRepair

Line: LN-12
Station: 888+00
Weld date: 2026-05-19
Spec: 24" × 0.375"

32.70280, -103.17880

No open cross-check alerts on this joint.

Welder passes

RootDitch side
Brent Kessler RC-540
May 19, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
RootWorking side
Dwayne Ferris RC-204
May 19, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassWorking side
Bo Kinchen RC-146
May 19, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassDitch side
Hector Ruiz RC-528
May 19, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
FillWorking side
Andre Pickett RC-412
May 19, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
FillDitch side
Kelly Boudreaux RC-350
May 19, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
CapDitch side
Andre Pickett RC-412
May 19, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
CapWorking side
Sam Whitfield RC-388
May 19, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
RepairWorking side
Andre Pickett RC-412
May 19, 2026, 10:30 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

RTRepair
May 19, 2026, 8:00 PM · D. Halloran (ASNT II)
Fit-up gap out of tolerance (charged to spread, not welder)
Not charged to a welder.
Repairable indication — grind and re-weld authorized.
RT film map — clock position3 indications
12123456789101112
- SISlag inclusion3:05–3:08 · 0.32" · d 0.06"Within acceptance limits.
- SISlag inclusion3:52–3:58 · 0.66" · d 0.07"SI exceeds API 1104 acceptance limits — charged for re-work.
- UCUndercut11:03–11:07 · 0.36" · d 0.06"Within acceptance limits.

Visual inspection (CWI)

Fit-upAcceptJoanne ReyesMay 19, 2026, 6:00 AM
API 1104 · Bevel, alignment and hi-lo verified prior to root.
Final visualAcceptJoanne ReyesMay 19, 2026, 1:07 PM
API 1104

Coating inspection

No coating inspection recorded for this joint.

Log a pass on this joint Record NDT result