J-1083

acceptedAccept

Line: LN-12
Station: 649+80
Weld date: 2026-05-15
Spec: 24" × 0.375"

32.46063, -102.95648

No open cross-check alerts on this joint.

Welder passes

RootDitch side
Odell Rains RC-121
May 15, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
RootWorking side
Dwayne Ferris RC-204
May 15, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassDitch side
Bo Kinchen RC-146
May 15, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassWorking side
Luis Ontiveros RC-231
May 15, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
FillWorking side
Kelly Boudreaux RC-350
May 15, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
FillDitch side
Kelly Boudreaux RC-350
May 15, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
CapDitch side
Jesse Karr RC-455
May 15, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
CapWorking side
Andre Pickett RC-412
May 15, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

RTAccept
May 15, 2026, 8:00 PM · P. Estrada (ASNT II)
No recordable indications.
RT film map — clock position1 indication
12123456789101112
- LCLow cap9:31–9:37 · 0.64" · d 0.03"Call varies by inspectorSlight low cap, judged within tolerance — accepted.

Visual inspection (CWI)

Fit-upAcceptHector SalasMay 15, 2026, 6:00 AM
API 1104 · Bevel, alignment and hi-lo verified prior to root.
Final visualAcceptHector SalasMay 15, 2026, 10:42 AM
API 1104

Coating inspection

No coating inspection recorded for this joint.

Log a pass on this joint Record NDT result