J-4000

Welder passes

1. RootWorking side
   Marcus Cole RC-118

   Jun 13, 2026, 8:35 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

2. RootDitch side
   Brent Kessler RC-540

   Jun 13, 2026, 8:35 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

3. Hot PassWorking side
   Travis Nolan RC-307

   Jun 13, 2026, 9:10 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

4. Hot PassDitch side
   Ty Maldonado RC-552

   Jun 13, 2026, 9:10 AM · logged by C. Ramirez (Survey)

   WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

   4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

5. FillWorking side
   Kelly Boudreaux RC-350

   Jun 13, 2026, 9:45 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

6. FillDitch side
   Kelly Boudreaux RC-350

   Jun 13, 2026, 9:45 AM · logged by C. Ramirez (Survey)

   WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

   4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

7. CapDitch side
   Kelly Boudreaux RC-350

   Jun 13, 2026, 10:20 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

8. CapWorking side
   Shane Bergeron RC-181

   Jun 13, 2026, 10:20 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

9. RepairWorking side
   Ronnie Pace RC-547

   Jun 13, 2026, 10:30 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

• RTRepair

  Jun 13, 2026, 8:00 PM · D. Halloran (ASNT II)

  Material lamination in pipe body (mill defect, not charged)

  Not charged to a welder.

  Repairable indication — grind and re-weld authorized.

  RT film map — clock position3 indications

  12123456789101112

  • UCUndercut4:50–4:55 · 0.49" · d 0.08"Within acceptance limits.
  • EUExcess reinforcement5:47–5:51 · 0.41" · d 0.07"Within acceptance limits.
  • PORPorosity6:40–6:56 · 1.74" · d 0.06"POR exceeds API 1104 acceptance limits — charged for re-work.
  Dispute this call