J-1160

repairRepair

Line: LN-12
Station: 696+00
Weld date: 2026-05-15
Spec: 24" × 0.375"

32.50760, -102.99960

No open cross-check alerts on this joint.

Welder passes

RootWorking side
Weston Trahan RC-133
May 15, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
RootDitch side
Dwayne Ferris RC-204
May 15, 2026, 8:35 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassWorking side
Travis Nolan RC-307
May 15, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
Hot PassDitch side
Luis Ontiveros RC-231
May 15, 2026, 9:10 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
FillWorking side
Andre Pickett RC-412
May 15, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
FillDitch side
Sam Whitfield RC-388
May 15, 2026, 9:45 AM · logged by C. Ramirez (Survey)
WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4
4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max
CapWorking side
Shane Bergeron RC-181
May 15, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
CapDitch side
Andre Pickett RC-412
May 15, 2026, 10:20 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max
RepairWorking side
Andre Pickett RC-412
May 15, 2026, 10:30 AM · logged by C. Ramirez (Survey)
WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G
6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

RTRepair
May 15, 2026, 8:00 PM · D. Halloran (ASNT II)
Fit-up gap out of tolerance (charged to spread, not welder)
Not charged to a welder.
Repairable indication — grind and re-weld authorized.
RT film map — clock position1 indication
12123456789101112
- UCUndercut7:35–7:55 · 2.14" · d 0.07"UC exceeds API 1104 acceptance limits — charged for re-work.

Visual inspection (CWI)

Fit-upAcceptHector SalasMay 15, 2026, 6:00 AM
API 1104 · Bevel, alignment and hi-lo verified prior to root.
Final visualAcceptHector SalasMay 15, 2026, 10:57 AM
API 1104

Coating inspection

No coating inspection recorded for this joint.

Log a pass on this joint Record NDT result