J-3080

Welder passes

1. RootDitch side
   Odell Rains RC-121

   Jun 4, 2026, 8:35 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

2. RootWorking side
   Brent Kessler RC-540

   Jun 4, 2026, 8:35 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

3. Hot PassWorking side
   Junior Escamilla RC-158

   Jun 4, 2026, 9:10 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

4. Hot PassDitch side
   Hector Ruiz RC-528

   Jun 4, 2026, 9:10 AM · logged by C. Ramirez (Survey)

   WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

   4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

5. FillDitch side
   Kelly Boudreaux RC-350

   Jun 4, 2026, 9:45 AM · logged by C. Ramirez (Survey)

   WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

   4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

6. FillWorking side
   Dale Whitcomb RC-533

   Jun 4, 2026, 9:45 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

7. CapWorking side
   Kelly Boudreaux RC-350

   Jun 4, 2026, 10:20 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

8. CapDitch side
   Dale Whitcomb RC-533

   Jun 4, 2026, 10:20 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

9. RepairWorking side
   Dale Whitcomb RC-533

   Jun 4, 2026, 10:30 AM · logged by C. Ramirez (Survey)

   WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

   6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

• RTRepair

  Jun 4, 2026, 8:00 PM · D. Halloran (ASNT II)

  Fit-up gap out of tolerance (charged to spread, not welder)

  Not charged to a welder.

  Repairable indication — grind and re-weld authorized.

  RT film map — clock position3 indications

  12123456789101112

  • LCLow cap7:35–7:38 · 0.38" · d 0.09"Call varies by inspectorWithin acceptance limits.
  • UCUndercut8:17–8:18 · 0.12" · d 0.03"Within acceptance limits.
  • LCLow cap8:19–8:25 · 0.63" · d 0.07"Call varies by inspectorLC exceeds API 1104 acceptance limits — charged for re-work.
  Dispute this call