WeldGuard
All joints

J-1400

repairRepair
Line
LN-12
Station
840+00
Weld date
2026-05-18
Spec
24" × 0.375"

32.65400, -103.13400

No open cross-check alerts on this joint.

Welder passes

  1. RootDitch side
    Marcus Cole RC-118

    May 18, 2026, 8:35 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

  2. RootWorking side
    Dwayne Ferris RC-204

    May 18, 2026, 8:35 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

  3. Hot PassWorking side
    Ty Maldonado RC-552

    May 18, 2026, 9:10 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

  4. Hot PassDitch side
    Hector Ruiz RC-528

    May 18, 2026, 9:10 AM · logged by C. Ramirez (Survey)

    WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

    4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

  5. FillWorking side
    Andre Pickett RC-412

    May 18, 2026, 9:45 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

  6. FillDitch side
    Sam Whitfield RC-388

    May 18, 2026, 9:45 AM · logged by C. Ramirez (Survey)

    WPS-1104-TI-11 Rev 1SMAW uphill 6G (fixed)E6010 / E7018-H4

    4–36 in OD · wall 0.188–0.75 in · hardness 235 HV10 max

  7. CapWorking side
    Cody Latham RC-165

    May 18, 2026, 10:20 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

  8. CapDitch side
    Andre Pickett RC-412

    May 18, 2026, 10:20 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

  9. RepairWorking side
    Andre Pickett RC-412

    May 18, 2026, 10:30 AM · logged by C. Ramirez (Survey)

    WPS-1104-DH-01 Rev 2SMAW downhill 5G / 6GE6010 / E8010-G

    6–36 in OD · wall 0.188–0.75 in · hardness 248 HV10 max

NDT results

  • RTRepair

    May 18, 2026, 8:00 PM · D. Halloran (ASNT II)

    Material lamination in pipe body (mill defect, not charged)

    Not charged to a welder.

    Repairable indication — grind and re-weld authorized.

    RT film map — clock position3 indications
    12123456789101112
    • UCUndercut4:46–4:57 · 1.20" · d 0.02"UC exceeds API 1104 acceptance limits — charged for re-work.
    • EUExcess reinforcement11:33–11:37 · 0.43" · d 0.04"Within acceptance limits.
    • PORPorosity11:34–11:37 · 0.31" · d 0.03"Within acceptance limits.

Visual inspection (CWI)

  • Fit-upAcceptJoanne ReyesMay 18, 2026, 6:00 AM

    API 1104 · Bevel, alignment and hi-lo verified prior to root.

  • Final visualAcceptJoanne ReyesMay 18, 2026, 10:00 AM

    API 1104

Coating inspection

No coating inspection recorded for this joint.

Log a pass on this jointRecord NDT result